当前位置:汽车配件110网 >> 供\求\合作、代理、招聘信息中心 >> 供应 >>克鲁勃EG 4-320合成高性能齿轮油 |
详细内容:产品基本信息: 型号:synth EG 4-320 英文名称:Klubersynth EG 4-320 粘度等级:ISO VG 320 品牌/产地:克鲁勃,德国 包装规格及价格:19L/3800 200L/35800 类型:高性能合成齿轮油 宝贝描述: Klübersynth EG 4-150(220,320,460,680,1000) 合成高性能齿轮油 说明:Klübersynth EG4G该油是合成高性能齿轮油符合要求的电和AGMA。他们还矿物油混溶。除了其出色的防腐和抗磨损性能,这些油是非常耐老化和氧化,并提供卓越的服务在低温下。他们还表现出低的趋势以泡沫。在FZG测试(A10/16,6R/90)的擦伤负荷的GL- 4的容量达到了。 应用领域:Klübersynth EG4该油特别适合润滑摩擦点受到高负荷在很宽的温度范围。该油可以用来润滑刺激,斜面和蜗轮。Klübersynth EG4稳定根据剪应力,并提供破乳剂优异的性能。中立的油反应总体上如常见的密封材料NBR或FPM和油漆。护理但应采取的从不同的弹性体制造商可以有不同的行为。因此,在“兼容性提供的数据与弹性体“一节应作参考,仅供参考。 性能:Klübersynth EG4合成高性能齿轮油划伤负载能力符合API GL4与矿物油混溶出色的防腐蚀保护耐老化 包装规格:19L,208L 德文: Klübersynth EG 4 oils Synthetic high-performance gear oils Synthetic high-performance gear oils Description The Klübersynth EG 4 oils are fully synthetic high-performance gear oils conforming to the demands of CLP and AGMA. They are also mineral oil miscible. In addition to their excellent anticorrosion and anti-wear properties, these oils are very resistant to ageing and oxidation and offer exceptional service at low temperatures. They also show a low tendency to foam. In the FZG test (A10/16,6R/90) a scuffing load capacity of GL 4 was achieved. Fields of application The Klübersynth EG 4 oils are particularly suitable for lubricating friction points subject to high loads over a wide temperature range. The oils can be used to lubricate spur, bevel and worm gears. Klübersynth EG 4 oils are stable under shear stress and offer excellent demulsifying properties. The oils react on the whole neutrally to common seal materials such as NBR or FPM and lacquers. Care should nevertheless be taken, as elastomers from different manufacturers can behave differently. Therefore the data given in the compatibility with elastomers“ section should be used for reference purposes only. For this reason a compatibility test should always be carried out with the elastomers which are actually used. Application notes The oils can be applied using the immersion, immersion circulation and injection methods. Total loss lubrication is possible with drip-feed, brush or oil feeder application. It is possible to apply the oils automatically, but attention should be paid to the maximum processableviscosity value in the manufacturer’s instructions. Viscosity selection for rolling bearings and gears To determine the correct oil viscosity please refer to the bearing manufacturer’s instructions or worksheet 3 from the Society of Tribology (GfT). The gear manufacturer’s instructions always take priority when determining the oil viscosity for gears. If instructions are not available from the gear manufacturer then the viscosity can be determined from the Klübersynth EG 4 oils – Selection of oil viscosity for gears“ work sheet. Operating temperature range Operating temperature values are reference values which have been established according to the lubricant structure, desired application and application engineering. Gear and chain lubrication by immersion: Klübersynth EG 4-150 /...220 from approx. -35 °C to 140 °C Klübersynth EG 4-320 /...460 from approx. -30 °C to 140 °C Klübersynth EG 4-680 from approx. -25 °C to 140 °C Klübersynth EG 4-1000 from approx. -15 °C to 120 °C Storage The minimum shelf life is approx. 36 months when stored carefully in a dry place and in closed original containers. Klübersynth EG 4 oils Synthetic high-performance gear oils Scuffing load capacity conforms to API GL 4 Miscible with mineral oil Excellent corrosion protection Ageing resistance Package sizes 19 l canister 208 l drum
|
|