当前位置:汽车配件110网 >> 供\求\合作、代理、招聘信息中心 >> 供应 >>克鲁勃B-F 1 ULTRA开式齿轮油 |
详细内容:产品基本信息: 型号:fluid B-F1 ULTRA 英文名称:Kluberfluid B - F1ULTRA 粘度等级:NLGI 品牌/产地:克鲁勃,德国 包装规格及价格:25KG/4880 180KG/33800 类型:开式齿轮润滑脂 宝贝描述: 中文:说明Klüberfluid B - F1ULTRA是runningin润滑剂,特别是开发循环或飞溅润滑。它有一个矿物基础油和含有硬脂酸铝作为肥皂增稠剂。其他添加剂和特种石墨除了确保控制运行中的新牙合宁侧面或损坏平滑齿面,完好侧翼的保护,同时时间。为减少磨损的影响经营时间的增加。Klüberfluid B -1 F ULTRA是一个非牛顿流体从沥青自由,溶剂,重金属和氯。按照与AGMA251.02Klüberfluid B -1 F ULTRA归类之间的“特殊化合物”(第3.4)。该规格表6,“极压齿轮润滑剂“得到充分满足。 应用:Klüberfluid B -1 F ULTRA采用的是在飞溅,桨轮或流通用于开式齿轮的润滑磨合润滑或侧面校正的目的。该应用的可能性是限制既不是组件的大小也没有能力驱动器。外设速度应不超过8.5米/秒。搜索驱动器主要安装在旋转窑中,管磨机,并机使用在水泥,石灰,石膏,采矿和化工行业。 KlüberfluidB F- 1 ULTRA不适合轴承的润滑(滚动或滑动轴承)。 包装尺寸25千克桶可移动的盖子180公斤桶 英文:Klüberfluid B-F 1 ULTRA Running-in lubricant for open drives Description Klüberfluid B-F1 ULTRA is a runningin lubricant especially developed for splash or circulation lubrication. It has a mineral base oil and contains aluminum stearate as a soap thickener. Other additives and the addition of special graphite ensure controlled running-in of new tooth flanks or smoothening of damaged tooth flanks, with the undamaged flanks being protected at the same time. The wear effect decreases as the operating time increases. Klüberfluid B-F 1 ULTRA is a non- Newtonian fluid free from bitumen, solvents, heavy metals and chlorine. In accordance with AGMA 251.02 Klüberfluid B-F 1 ULTRA is classified among the "Special Compounds" (para 3,4). The specifications of Table 6, "Extreme Pressure Gear Lubricants" are fully met. Application Klüberfluid B-F 1 ULTRA is used in the splash, paddle wheel or circulation lubrication of open gears for running-in lubrication or for flank correction purposes. The application possibilities are restricted neither by the component’s size nor the capacity of the drives. The peripheral speed should not be more than 8.5 m/s. Such drives are mainly installed in rotary kilns, tube mills, and machines used in the cement, lime, gypsum, mining and chemical industries. Klüberfluid B-F 1 ULTRA is not suitable for the lubrication of bearings (rolling or sliding bearings). Application notes For splash lubrication Klüberfluid B-F 1 ULTRA is filled into the oil bath and is thus transferred directly to the tooth flanks. With the Klübermatic PA circulation lubrication system, the lubricant is directly sprayed onto the tooth flanks. Storage 24 months at room temperature. Protect the package from direct sunlight. Pack size 25 kg bucket 180 kg drum with removable cover Running-in lubricant for open drives Klüberfluid B-F 1 ULTRA ● Running-in and correction lubricant for open drives with splash or circulation lubrication ● Free from heavy metals, solvents, bitumen and chlorine ● Easy application ● Controlled wear for flank correction Colour Texture Density at 20 °C, DIN 51 757, g/cm3 Worked penetration in acc. with Klein at 25 °C Base oil viscosity, DIN 51 561, approx . 20 °C, mm2/s 40 °C, mm2/s 100 °C, mm2/s VI base oil, DIN ISO 2909 VKA welding force, DIN 51 350, Pt 4 FZG A/2.76/50 °C, DIN 51 354 Evaporation loss after 100 h at 100 °C Application by splash lubrication, °C Application by circulation lubrication, °C Efficient lubricant film, °C Thermal load limit for lubricating film, °C Product data black homogenous, fluid approx. 1.01 500 · 0.1 mm ± 30 7000 1300 60 approx. 96 ≥ 7500 Scuffing load stage > 12 work-related loss in weight approx. 1.0 mg/kWh < 1 % by weight 0 to 100 10 to 80 to ≈ - 30 to 200
|
|