克鲁勃C-F 2 ULTRA开式齿轮润滑脂

详细内容：产品基本信息： 型号：fluid C-F 2 ULTRA 英文名称:Kluberfluid C-F 2 ULTRA 粘度等级：NLGI 品牌/产地：克鲁勃，德国 包装规格及价格：25KG/4650 180KG/31800 类型：开式齿轮润滑油 宝贝描述： Klüberfluid C-F 2 ULTRA润滑油业务的开放驱动器 说明:Klüberfluid C - 2 Ultra是一个F级别润滑油制定了循环或飞溅润滑。它有一个矿物基础油并含有硬脂酸铝作为皂稠化剂和固体润滑剂石墨微粒。它可耐高压力和包含抗磨损和腐蚀添加剂抑制剂。在极端的情况下，这润滑油是适合到一个组件温度200 °C。Klüberfluid C - F 2 ULTRA是一个非牛顿流体从沥青自由，溶剂，重金属和氯。按照与AGMA9005 - e94 F Klüberfluid C - 2 Ultra是分类之间的“特殊化合物”第3.1.6，表AGMA4无润滑剂10 EP。 应用：Klüberfluid C - F 2 ULTRA用于在飞溅，桨轮或流通开式齿轮润滑。被限制的应用的可能性既不是组件的大小也不是驱动器的容量。外设速度不宜超过8.5米/秒。合并后齿轮和轴承的润滑不允许的。搜索驱动器主要安装在回转窑，管工厂，并在使用的机器水泥，石灰，石膏，采矿和化工行业.. 包装规格：25千克桶可移动的盖子180公斤桶 英文： Klüberfluid C-F 2 ULTRA Operational lubricant for open drives Description Klüberfluid C-F 2 ULTRA is an operational lubricant especially developed for splash or circulation lubrication. It has a mineral base oil and contains aluminum stearate as a soap thickener and solid lubricant particles of fine graphite. It is resistant to high pressure and contains antiwear additives and corrosion inhibitors. In extreme cases this lubricant is suitable up to a component temperature of 200 °C. Klüberfluid C-F 2 ULTRA is a non- Newtonian fluid free from bitumen, solvents, heavy metals and chlorine. In accordance with AGMA 9005- D 94 Klüberfluid C-F 2 ULTRA is classified among the "Special Compounds" para 3.1.6, table 4 of AGMA Lubricant No. 10 EP. Application Klüberfluid C-F 2 ULTRA is used for the splash, paddle wheel or circulation lubrication of open gears. The application possibilities are restricted neither by the component’s size nor the capacity of the drives. The peripheral speed should not be more than 8.5 m/s. A combined lubrication of gears and bearings is not permissible. Such drives are mainly installed in rotary kilns, tube mills, and machines used in the cement, lime, gypsum, mining and chemical industries. Application notes For splash lubrication Klüberfluid C-F 2 ULTRA is filled into the oil bath and is thus transferred directly to the tooth flanks. With the Klübermatic PA circulation lubrication system, the lubricant is directly sprayed onto the tooth flanks. Storage Produ 24 months at room temperature. Protect the package from direct sunlight. Pack sizes 25 kg bucket 180 kg drum with removable cover Klüberfluid C-F 2 ULTRA ● Operational lubricant for open drives with splash or circulation lubrication ● Suitable for normal to elevated operating temperatures ● Free from heavy metals, solvents, bitumen and chlorine ● Easy application ● Maximum flank protection Product data Colour Structure Density at 20 °C, DIN 51 757 Worked penetration in acc. with Klein at 25 °C Base oil viscosity, DIN 51 561 20 °C, mm2/s 40 °C, mm2/s 100 °C, mm2/s VI base oil, DIN ISO 2909 VKA welding force, DIN 51 350 Pt 4 FZG A 2.76/50 °C, DIN 51 354 Evaporation loss after 100 h at 100 °C Application by splash lubrication Application by circulation lubrication Efficient lubricant film Thermal load limit for lubricating film black homogenous, fluid ≈ 1.00 g/cm3 450 · 0.1 mm ±40 ≈ 22000 ≈ 3200 ≈ 94 ≈ 84 ≥ 7500 Scuffing load stage > 12 work-related loss in weight ca. 0.2 mg/kWh < 1 % by weight 5 °C to 100 °C 15 °C to 80 °C to ≈ - 30 °C to 200 °C