原装克鲁勃GEM 1-68N高性能合成齿轮油

详细内容：产品基本信息： 型号：oil GEM 1-68 N 英文名称:KLUBERoil GEM 1-68 N 粘度等级：ISO VG 68 品牌/产地：克鲁勃，德国 包装规格及价格：20L/4050 200L/29000 类型：齿轮油/多用途油 宝贝描述： KLUBEROILGEM 1 N齿轮和多用途油的基础上选定的矿物油具有极高的抗氧化性能。他们有很高的耐划伤和微FVA 54号的规定，在。良好的抗磨特性,KLUBEROIL GEM 1 N油也被证明滚动轴承标准FAG FE 8齿轮油的试验台。KLUBEROIL GEM 1 N油也提供了良好的防腐蚀和中性朝最有色金属，弹性体和内墙涂料中常用的齿轮建设。 产品信息： KLUBEROIL GEM 1 - 46 ... 680基于矿物油的高性能齿轮油/多用途油润滑油科技KlüberComp KLUBEROIL GEM 1 - 46 ... 680 N，。编号：030050，030051，030054，030057，030058，030062，030063，030064，EN版08.10，取代版06.09MA-TM/HSi 应用: KLUBEROIL GEM 1 N油开发了用于润滑的直齿圆柱齿轮，锥齿轮，准双曲面齿轮和行星齿轮，受高负荷。这样的齿轮中经常使用的风，钢铁，采矿业和制糖业。KLUBEROIL GEM 1 N油也可用于标准蜗杆齿轮的润滑DIN 3996标准中定义。它们也可用于润滑的滑动和滚动轴承，各种齿联轴器，链条，导轨，关节，主轴和泵。 应用笔记： KLUBEROIL GEM 1 N油可应用于手段，浸入循环或注入。滴饲料注油器，刷子，油罐或使用也是合适的自动润滑系统可能。当使用自动润滑系统，请注意制造商的说明关于允许的最大粘度。低粘度的润滑剂也可用于油的油雾润滑。应该指出的是，弹性体由一种或几个厂家可以有不同的行为;因此应该进行测试。 粘度的选择: 当确定齿轮油的粘度，制造商的指示优先考虑。仅适用于制造商的应用场合指令是不可用的，合适的粘度可确定放下在DIN51 509。要确定正确的机油粘度轴承，请遵守轴承制造商的说明。 包装尺寸：20L桶 200L鼓桶 （原文德语） Klüberoil GEM 1-N High-performance gear and multi-purpose oils Description： The oils of the Klüberoil GEM 1-N series are high-performance gear and multi-purpose oils on a mineral oil basis. They comply with the CLP gear oil requirements, DIN 51 517 Pt 3. They stand out for their good antiwear and anticorrosion properties and their neutrality towards nonferrous metals. All oils of this series are free from silicone and have a low foaming tendency. In the tests according to DIN 51 354 Pt 2, A/8.3/90 (FZG test), these oils had a scuffing load stage > 12 and a change in specific weight ≤ 0.2 mg/kWh. Application: Klüberoil GEM 1-460N oils are suitable for the lubrication of friction points subject to high loads in spur, bevel and worm gears, rolling and sliding bearings, spindles, chains, guideways, joints and toothed couplings. The low-viscosity oils of this series can also be used in hydraulic systems. Application notes: The Klüberoil GEM 1-N series can be used for immersion, immersion/ circulation, and injection lubrication. In addition, these products can also be applied through a force-feedsystem, an automatic lubrication system, by brush or oil can. When using an automatic system, observe the manufacturer’s instructions on the maximum viscosity which can be used. The low-viscosity oils of this series can also be used for oil-mist lubrication. Service temperature range*: Lubrication of gears and chains by immersion: ISO VG 46 to 68: from approx. – 15 °C to approx. 100 °C ISO VG 100 to 220: from approx. – 5 °C to approx. 100 °C ISO VG 320 to 680: from approx. 0 °C to approx. 100 °C Total loss lubrication depending on relubrication: up to approx. 120 °C Minimum shelf life: The minimum shelf life is approx. 36 months if the product is stored in the original closed container in a dry place. Pack sizes: 20 l canister 200 l drum Klüberoil GEM 1-N oils Comply with CLP gear oil requirements Free from silicone Resistant to ageing and oxidation Anti-wear properties FZG scuffing load stage > 12