克鲁勃BE 41-1501高负荷重型低速润滑脂

详细内容：产品基本信息： 型号：lub BE 41-1501 英文名称:Kluberlub BE 41-1501 粘度等级：NLGI 品牌/产地：克鲁勃，德国 包装规格及价格：1KG/580 25KG/13200 180KG/98800 类型：无铅重型低速润滑脂滚动轴承承受高负荷 宝贝描述： Klüberlub BE 41-1501无铅重型低速润滑脂滚动轴承承受高负荷。 说明:这种重型油脂下设高粘度矿物烃油（ISO VG1500），特殊特别是有效和锂皂基EP / AW添加剂。它也包含（二硫化钼固体润滑剂和石墨），以确保可靠的操作润滑下饿死条件。Klüberlub BE41-1501耐针对老龄化和保护可靠腐蚀。 应用：Klüberlub BE41-1501 尤其是开发了大型低速滚动轴承承受高负荷。它通常适用于润滑滚子轴承（调心滚子轴承）在辊压机，碗工厂和基地回转式破碎机材料产业。对经营条件滚子轴承，即- 低转速，N=10-30转- 高负荷，P/ C =0:25至0:50- 轴承温度约。50 - 70° C- 冲击和震动负载需要用重型润滑脂高粘度基础油和优良的抗磨性能，如像Klüberlub油脂BE41-1501。这种油脂也是合适的润滑轴承和旋转滑动轴承。 包装规格：1千克罐25千克桶180公斤桶 英文： Klüberlub BE 41-1501 Lead-free heavy-duty grease for low-speed rolling bearings subject to high loads Description This heavy-duty grease consists of a highly viscous mineral hydrocarbon oil (ISO VG 1500), special lithium soap and particularly effective EP/AW additives. It also contains solid lubricants (MoS2 and graphite) to ensure reliable operation under starved lubrication conditions. Klüberlub BE 41-1501 is resistant to ageing and protects reliably against corrosion. Application Klüberlub BE 41-1501 was especially developed for large low-speed rolling bearings subject to high loads. It is typically applied to lubricate the bearings of rollers (spherical roller bearings) in roller presses, bowl mill and rotary crushers in the base material industry. The operating conditions of the roller bearings, i.e. – low speed, n = 10-30 rpm – high load, P/C = 0.25 – 0.50 – bearing temperature approx. 50 – 70 °C – shock and vibration loads require a heavy-duty grease with a high base oil viscosity and excellent antiwear properties, such as a grease like Klüberlub BE 41-1501. This grease is also suitable for the lubrication of pivoting bearings and plain bearings. Application notes The ambient temperature should be ≥15 °C when Klüberlub BE 41-1501 is applied with an automatic greasing pump. Storage The storage period is approx. 2 years if the product is stored in the original closed container in a dry place. Pack sizes 25 kg bucket 180 kg barrel Klüberlub BE 41-1501 ● heavy-duty grease ● high base oil viscosity (ISO VG 1500) ● excellent wear protection ● contains solid lubricant for emergency operation ● free from lead and chlorine Behaviour towards elastomers and plastics Generally, plastics and elastomers that are resistant to mineral hydrocarbon oils also offer adequate resistance to Klüberlub BE 41-1501. For safety reasons, however, we recommend conducting a resistance test prior to series application. Compatibility with elastomers 100 °C; 168 h 72 NBR 902 Change in volume % < 10 Change in hardness Shore A, approx. -5 Antiwear behaviour 500 h test on the FAG-FE-8 rolling bearing test rig 1 test run 2 angular contact ball bearings 7312 TP, Fa = 80 kN, P/C = 0.54, n = 7.5 rpm Steady-state temperature, °C Friction moment, Nm Rolling element wear (V50), mg 2 test runs 4 tapered roller bearings 31312 A, Fa = 50 kN, P/C = 0.24, n = 75 rpm Steady-state temperature, °C Friction moment, Nm Rolling element wear (V50), mg 36.4 * 19.7 * 2 ** 46 * 15.5 * 18 ** * Average values ** Requirement of FAG/Schweinfurt for a "heavy-duty grease": ≤ 35 mg Summary of FAG test results (excerpt): "From the test results it can be concluded that Klüberlub BE 41-1501 meets the requirements for FAG grease category LG12. This means that it is suitable for application in low-speed rolling bearings subject to very high loads and shocks (in case of point and linear contacts) used, for example, in roller presses and bowl mill crushers."