POM/C13/沙伯基础（原GE）

详细内容：POM/C13/沙伯基础（原GE）POM/Hostaform/C2521XAP2/美国塞拉尼斯PA6/C216V35法国罗地亚PA66/90G33PBT/WFB62/compound/沙伯基础POM/F30-01/韩国工程塑料PA12/3020X29L/欧洲宇部POM/DURACON/M450-44/日本宝理POM/TS-22H/韩国工程塑料PA66/A246MPA12/UBESTA/3020U/日本宇部PA66/1502SPBT/1154W/日本东丽PA66/REF42I/沙伯基础PBT/POCAN/BF4232HR/德国朗盛PA12/Grilamid/TR90UV/瑞士EMSPA66/RFL26S/沙伯基础POM/N2640Z6/德国巴斯夫PBT/TE5011AR/韩国LGPA66/CM3004G-30/日本东丽POM/100TL美国杜邦POM/W2642Z4/德国巴斯夫PA66/SE25CPA12/TR55LY/瑞士EMSPA12/ARVO/950/TLD/法国阿科玛POM/Hostaform/CF80210/9022/美国塞拉尼斯POM/C9021GV1/30GT/泰科纳POM/TB-31/韩国工程塑料PA66/AVP/GYYHSUVCP沙伯基础POM/M90/台湾宝理POM/DURACON/FP15X/日本宝理PA6/K-FHG7荷兰DSMPA66/14G33PA6/DPBM65XFM30德国朗盛POM/CH-20/日本宝理PA6/CM1017-C日本东丽 POM/C13/沙伯基础（原GE） POM/C13/沙伯基础（原GE） LDPE The film can be used in packaging materials and capacitor films. For the food packaging industry, the gas permeability of the biaxially stretched PP film is lower. To reduce permeability, the first is to reduce the permeability of PP material, which can be achieved by filling and modifying, but the effect is not very obvious. The two is to reduce permeability through blocking the contact between PP film and gas. It is also easy to achieve the following 2 methods. BOPP can be used to separate gas by spraying, such as spraying two vinyl chloride or vinylidene ethyl alcohol to the surface of the membrane, with a thickness of about 0.0075 millimeters. Another method is vacuum aluminizing, with a thickness of about 0.0002 millimeters to block oxygen and so on. 3.PP needling omentumPOM/C13/沙伯基础（原GE）POM/VW-32/日本宝理PBT/V8030CS/resin/沙伯基础PBT/LW9330/美国杜邦PBT/Crastin/FGS600F40/美国杜邦PA66/N3-30FG-1626POM/M90/美国塞拉尼斯PA66/A3X2G5POM/TC3010/韩国工程塑料PA6/BG30X/朗盛（拜耳）PA6/1021STBRIGHT/法国罗地亚PA66/A3WG13LFXPA66/U328/日本东丽PA66/54G33PA66/70G43L/美国杜邦/POM/Hostaform/XGC25-LW01/美国塞拉尼斯PA6/SX218V50-K/法国罗地亚PA66/25RS4PA6/B3WG6GPPOM/MC90-HM/泰科纳PBT/1102/resin/沙伯基础PA12/VESTAMID/NRG2101/德国赢创(德固赛)PBT/DURANEX/CN5315N/B/日本宝理PBT/LW2547W/泰科纳PBT/Ultradur/B4330G6HR/德国巴斯夫PBT/2122/泰科纳POM/GB25/日本宝理PA66/RF005SXS/沙伯基础PA6/1013NW8泰国宇部PA6/BKV30DUS000德国朗盛PA6/B3ZG4PBT/4602Z/泰科纳PA66/RF005/沙伯基础PA6/CM1021日本东丽POM/TF-20/日本宝理PA6/BG-50FC瑞士EMS The membrane is an upgrading product of the tear film, and it can be used in sewing thread, carpet weaving, marine fishing and other industries. The process flow is as follows: Feeding, extrusion, film cooling, cutting and dividing wire, three roll traction, heating, stretching, needle forming fiber, heat treatment, cooling setting and winding. The temperature of the fuselage: 220, 230, 260, 255 C, the head temperature 250 C, the die head 250 centigrade, the PP melt index 1.5-4 g /10. The film cooling, water temperature 38 C, hot stretching temperature 150-165 degrees C, tensile multiple 5-6 times, cooling roll speed is lower than heat treatment roll speed 2-5%, stretching speed of 240 meters / points. 4.PP isolation membranePOM/C13/沙伯基础（原GE）POM/LM140LG/美国塞拉尼斯PA66/A238PBT/3300-2LM/泰科纳PBT/K4560/沙伯基础（原GE）PA12/1111/赢创德固赛PA6/K224-LGM35荷兰DSMPBT/SG-5150/韩国LGPBT/CELANEX4306/日本宝理PBT/J235/泰科纳PA66/FN718/美国杜邦/POM/4520/杜邦－旭化成POM/C9021M/泰科纳POM/ET-20A/韩国工程塑料PA6/NY650GF/沙伯基础（原GE）PA66/FG133F1/美国杜邦/PBT/GP1000W/韩国LGPA66/A3EG6BK00564PA66/NY66GP/沙伯基础（原GE）PET/PBT/7062X/Resin/沙特sabicPA12/VESTAMID/L1833/德国赢创(德固赛)PA66/A3ZHPUVPBT/LW-5303F/韩国LGPOM/F10-03H/韩国工程塑料PBT/POCAN/T7323/德国朗盛POM/H2320-004/德国巴斯夫PBT/Ultradur/B2550/FC/德国巴斯夫PBT/7151G-X01/日本东丽PBT/NH2306F/韩国LGPBT/Lupox/GP2100韩国LGPA66/A3WC8POM/Kepital/FB2025/韩国工程塑料PA66/A205FROUGE57POM/fu2020/韩国工程塑料PBT/CelstranPBT/-GF50-08/美国塞拉尼斯POM/H2320-006/德国巴斯夫 The PP isolation membrane can be used as an isolating layer between the conductor and the rubber insulation in the wire and cable. It can prevent adhesion between metal conductor and rubber sleeve. The process flow is as follows: Ingredients, kneading, extrusion, blowing and cooling, traction, cutting, winding, cutting and inspection. The melting index of the PP material is below 3.5 g /10. The extruder temperature is 180, 190-200, 200-210 C, and the temperature of the die head POM/C13/沙伯基础（原GE）POM/MR-320/LG化学PA6/BKV30W1德国朗盛PA12/L1940/赢创德固赛PA12/UBESTA/3024GC6/日本宇部POM/Hostaform/C13021LS10/1570/美国塞拉尼斯PBT/Toraycon/1154W/日本东丽PBT/EE-4400/韩国LGPOM/Ultraform/N2640Z6/德国巴斯夫PA66/RFP36/沙伯基础PBT/4031/Resin/沙特sabicPA6/CM1011G-15日本东丽PBT/Celanex/3100-2/美国塞拉尼斯PA66/RVL29/沙伯基础PA12/Rilsan/ASR/30/法国阿科玛PBT/Ultradur/B4500/德国巴斯夫PA66/A3EG7PBT/hn7315/日本宝理PA6/1013RW泰国宇部PA66/D3G10POM/DURACON-GC-25/日本宝理PA66/70K20HSL/美国杜邦/POM/Lucet/GB-325/韩国LG化学POM/Hostaform/AM90SPlus/美国塞拉尼斯PA6/K-FHGM24荷兰DSMPA66/11C140NC/美国杜邦//PA66/640PG5/台湾南亚PA6/BG30XF30德国朗盛POM/Hostaform/FK2:25/美国塞拉尼斯PA66/CDN01-004/日本东丽PA12/Grilamid/XE3926/瑞士EMSPET/PBT/SG5500/韩国LGPA66/91G55POM/Kepital/F30-03/韩国工程塑料PBT/T845FR/美国杜邦PBT/Ultradur/B4520/德国巴斯夫 EEA In storage, we should keep away from the fire source, heat insulation, keep dry and clean in the warehouse, strictly prohibit any impurities mixed, strictly prohibit the sun and rain. Transportation should be stored in a clean, dry and roofed carriage or cabin, and no sharp objects such as iron nails are allowed. It is strictly prohibited to mix organic solvents such as flammable aromatic hydrocarbons and halogenated hydrocarbons. For example, the four liters of mineral water in a farmer's spring is a big bucket, which is the material. Recycling POM/C13/沙伯基础（原GE）PBT/WL0049/compound/沙伯基础PA66/A218S30PA66/114L/美国杜邦/POM/F40-03/韩国工程塑料PA12/Rilsan/AMN/P30/LD/法国阿科玛PA66/EFE6096/美国杜邦/PA66/RV00CEXP/沙伯基础PA6//PFL38S/沙伯基础PBT/Vandar/8000/美国塞拉尼斯PA66/2411GF6PBT/ASA/S/4090/G4X/德国巴斯夫PA6/B24NFD05/PBT+PET/Ultradur/B4040G6德国巴斯夫PBT/Crastin/S620F20/美国杜邦PBT/1400FC/美国塞拉尼斯PA6/F132-C荷兰DSMPBT/Ultradur/B4300G4德国巴斯夫POM/HC350/日本旭化成PA6/B3301PA12/VESTOSINT/1141/德国赢创(德固赛)PA12/UBESTA/3035LU1/日本宇部POM/9520/杜邦－旭化成POM/DURACON/TW-51/日本宝理POM/Celcon/LW90/美国塞拉尼斯PA6/C218V50法国罗地亚PA12/VESTAMID/ML18/德国赢创(德固赛)PBT/3100-2/泰科纳POM/S9364/泰科纳PA6/8262GHSPBT/POCAN/T7141/德国朗盛PA6/PFI12R/沙伯基础（原GE）PBT/WFP36/沙特sabicPBT/S600F30/美国杜邦PA6/BKV230H2.0德国朗盛PA66/A3X3G7 (2) the typical representative of the ring tube reactor process ring tube reactor process is the Phillips process of Phillips company and the Innovene S process of INEOS company. Phillips process using isobutane as diluent, the chromium catalyst, the catalyst must be activated before use, isobutane activated catalyst powder with high purity under the protection of nitrogen formed catalyst slurry, and then enter the loop reactor, ethylene monomer after refining, and hydrogen, a TIGI olefin monomer 1 pre mixed and then injected into the loop reactor, the ethylene production of polyethylene in the presence of catalyst. The axial flow pump maintains the high speed flow and very uniform mixing of the material in the reactor, and the reaction heat is evacuated evenly from the jacket cooling water. The MI range of this process is 0.15 - 100, and the density is 0.936 - 0.972 g/cm3. The characteristics of the reactor loop is: less equipment, short process, low investment cost; do not produce wax and oligomer, not sticking to the wall; the powder of good shape, easy to transport; depending on the reaction heat jacket of the reactor cooling water out, heat removing easy, convenient adjustment; raw material demand is higher, need purification; copolymerization the monomer using hexene; using isobutane as solvent, the easy escape of residual solvents. The process flow is as follows: fresh polymerized ethylene is mixed with molecular weight regulator hydrogen, antifreeze and circulating diluent isobutane after drying, and then sent into a multi loop continuous flow reactor, and catalyst is added into isobutane into a reactor. The reaction temperature is 106.7 degrees centigrade, and the pressure is 3.9MPa. The polymer and the diluent residual pulp through the axial flow pump at the speed of 6m/s through the loop reactor. Reactor water cooling control reaction temperature set in the solid polymer by loop reactor outlet vertical settlement. As a result, the concentration of slurry can reach 55% and the conversion rate is 98% - 99%. The polymer is discharged after the flash evaporation to discharge the isobutane and the residual monomer into the diluent recovery unit. Other solid polymers are mixed with additives and granulation. 2, gas phase polymerization and gas phase polymerization (gas phase fluidized bed method) typical process for Innovene technology univation Technology chemical company DOW univation technology and INNOS company by low pressure gas phase fluidized bed reactor using z/n catalyst and catalyst, purification of raw material into the reactor, resulting in polymerization catalyst storage under the action of reaction in 85~110. [. Pressure was conducted for 2.41 MPa, the single pass conversion of ethylene is about 1% ~ 2%, the reaction heat removal mainly through the cooling cycle logistics, MI range of products for the production of 0.01 to 150, the density ranges from 0.915 to 0.970 g/cm3. The characteristics of gas phase fluidized bed polymerization process is: low operating pressure, low temperature; can produce full density polyethylene; catalyst system including titanium, chromium; metallocene catalyst; high purity of raw material, all raw materials are to be refined; without solvent, low energy consumption, low operation cost and maintenance. The production process is: dry monomers with POM/C13/沙伯基础（原GE）PA6/B3WG7PBT/VANDAR2122/泰科纳PBT/2300GV1|50/泰科纳PA6/H3KC(U)PA6/CM1011G-30日本东丽/PBT+ASA/Ultradur/S4090G4德国巴斯夫PA66/A117V33PBT/2016/泰科纳PA12/Rilsamid/AESN/Noir/P202/CTL/法国阿科玛PBT/B4406G6/德国巴斯夫POM/Hostaform/S9364LPB/美国塞拉尼斯PA12/3030JFX1/日本宇部POM/DURACON/LU-02/日本宝理PA66/SP10SPA6/PK005EI2/沙特sabicPA12/Rilsan/AESN/P20/TL/法国阿科玛POM/C9021LS/泰科纳PBT/7390w/日本宝理PBT/Celanex/3300FC/美国塞拉尼斯PBT/815/resin/沙伯基础POM/Celcon/UV25Z/美国塞拉尼斯PBT/TV8260/荷兰DSMPA66/A3HG7PA12/UBESTA/3014U/日本宇部PA66/NY6633GH/沙伯基础（原GE）PBT/553U/沙伯基础（原GE）PA6/BKV30H1.0/朗盛（拜耳）PA66/N3-33FG-2626PA66/NY66FC/沙伯基础（原GE）PA6/FP10KTPA6/PS003E/沙特sabicPA12/VESTAMID/EE40-S3/德国赢创(德固赛)POM/Kepital/FW-24/韩国工程塑料PBT/3315GK/韩国工程塑料POM/DURACON/M270-44/日本宝理 hydrogen added to a reactor system, the raw material into a large circulation steam flow circuit, and through the gas distribution by entering the large fluidized bed reactor at the bottom, according to the design of the reactor material 69.57% (ethylene vinyl content of 99.9%, 0.1%, 10.43%, 7.56% hydrogen oxide) ethane and 12.44% nitrogen. This raw gas consists of the production of the product with the 8g/10min melt index and the density of the 0.964g/cm3. The catalyst consists of titanium trichloride and tetrahydrofuran for two Magnesium Oxide mixture accelerator, AlEt3 catalyst. The catalyst enters the device in the form of solid state and nitrogen from the non pain reactor. The operating temperature is 105 centigrade, and the specific temperature is determined according to the brand name. The reactor pressure is 2.0MPa, and the reaction gas comes out from the top of the reaction. The cyclone separates the catalyst containing solid material and sends it back to the reactor. Then the gas from the cyclone separator is circulated to the bottom of the reactor after the compression and circulating coolers. The reactor discharge through an air lock system intermittently to product tank. Part of the gas entering the discharge tank enters the compressor cycle system through the upper buffer tank, filter, gas cooler, and separation tank. The polymer comes out from the lower part of the discharge tank and enters the washing tank and the post treatment system.