进口不锈钢高温电磁阀（图）

详细内容：进口不锈钢高温电磁阀（图） 德国泰科阀门（国际）有限公司—广州总代理 德国泰科（TEK）专利技术、独特设计、活塞结构、寿命超长、耐温线圈、不易烧毁、精密铸造、外观精美。 应用范围 船舶重工、石化、电力、机械、食品加工、干燥设备、暖通空调等。 超高温电磁阀 技术参数说明 动作方式： 直动型、先导型、反冲型（无压差型），根据口径大小、介质压力选择其中一种。 控制方式： 常闭式、常开式，根据工况要求选择。 电源电压： AC24V、AC36V、AC127V、AC220V、AC380V、DC12V、DC24V、DC36V、DC72V、DC110V、DC220V，根据工况要求选择。 防护型式： 普通型、防尘型、防水型、防爆型、船用型，根据工况要求选择。 压力范围： 0-0.3MPa（无压差）、0-0.6MPa（无压差）、0.03-0.6MPa、0.03-1.6MPa、0.03-2.5MPa、0.03-4.0MPa、0.03-6.3MPa 介质温度： 0-200℃、0-250℃、0-300℃、0-600℃，根据工况要求选择。 环境温度： -20-60℃、-40-60℃，根据工况要求选择。 连接方式： 内螺纹连接、法兰连接，根据工况要求选择，但是通径超过DN50，均为法兰连接。 阀体材质： 304不锈钢、316不锈钢，根据工况要求选择德国泰科选型指导：德国泰科电磁阀产品规格品种齐全，主要生产：水用电磁阀、蒸汽电磁阀、燃气电磁阀、空气电磁阀、真空电磁阀、油用电磁阀、制冷剂电磁阀、防爆电磁阀、防腐电磁阀、超高压电磁阀、超高温电磁阀、超低温电磁阀、带手动电磁阀、自保持电磁阀、紧急切断电磁阀（通电关闭）、紧急切断电磁阀（断电关闭）、信号反馈电磁阀、脉冲除尘电磁阀、可调流量电磁阀、纯净液体专用电磁阀、双流量电磁阀、三通电磁阀（一）、三通电磁阀（二）、三通电磁阀（三）、潜水电磁阀、自带滤网电磁阀等，共有六十个糸列，上万个规格品种。电磁阀产品分类方式按动作方式分类 A、直动式 B、先导式、C、反冲式(无差压)控制方式分类 A、常闭式 B、常开式按外壳防护型式划分 A、普通型 B、防尘型 C、防水型 D、防爆型按接管连接型式分类 A、螺纹式 B、法兰式按流通介质分类 蒸汽、空气、水、油、燃气、制冷剂按工作压力分类 W-无压差:0～0.6MPa、L-低压:0.03～0.6MPa、M-中压:0.03～1.6MPa、H-高压:0.03～2.4MPa、C-超高压：0.1～380MPa (共12种超高压范围)注：高压只适合小口径阀按额定电压分类 交流：AC24V、AC110V、AC220V、AC127V、AC380V直流：DC12V、DC24V、DC110V、DC220V按线圈功率分类 8(0.34A)、14(0.6A)、24(1A)、50(2.1A)(交流为VA、支流为W)按介质温度分类 -196℃、-50℃、+60℃、+120℃、+200℃、+250℃、+350℃、+450℃ “四两拨千斤”，先导电磁阀正是根据这个道理，比较适合于大口径，高压力工况下使用。但是一定要注意的是，流通的介质要有一定的压力。我厂生产的各种先导型电磁阀要求介质的压力应大于0.03Mpa才能正常使用。反冲型电磁阀原理：反冲型电磁阀（即无压查式），也称为分步直动式电磁阀，是集直动式和先导式结构为一体的电磁阀。它既可以在介质无压力的工况下靠线圈的吸力打开主阀塞，又可以在介质压力较高的工况下，使主阀塞产生压差而开启电磁阀。当线圈（1）通电，动铁芯（3）吸合，打开主阀塞（5）上的先导孔（7），同时带动主阀塞（5）开启，介质流通。故介质无压力主阀塞（5）靠线圈（1）的吸力开启，介质有压力的情况下，主阀塞（5）靠压差开启。反之亦然。适用范围：一般情况下，反冲型电磁阀的线圈体积和功率比先导型的大，比较适合介质压力从零到几公斤的范围下使用，并且也适合较大的电磁阀通径。特别要主要的是，反冲型电磁阀必须水平安装！口径较小的反冲型电磁阀也可以垂直安装，但用户要特别提出。 German TEK Valves (International) Co., Ltd. - Guangzhou distributor German TEK (TEK) patented technology, unique design, the piston structure, long life, temperature coil, not burned, precision casting, attractive appearance. Applications Shipbuilding Industry, petrochemical, electricity, machinery, food processing, drying equipment, HVAC, etc. Ultra-high temperature solenoid valve Technical Parameters Action by: Direct acting, pilot type, recoil type (no pressure type), according to the aperture size, medium pressure select one of them. Control mode: normally closed, normally open, according to the conditions required to select. Power supply voltage: AC24V, AC36V, AC127V, AC220V, AC380V, DC12V, DC24V, DC36V, DC72V, DC110V, DC220V, under the conditions required choice. Protection Type: ordinary type, dust-proof, waterproof, explosion proof, marine type, according to the conditions required to select. Pressure range: 0-0.3MPa (no pressure) ,0-0 .6 MPa (no pressure) ,0.03-0 .6 MPa ,0.03-1 .6 MPa ,0.03-2 .5 MPa ,0.03-4 .0 MPa ,0.03-6 .3 MPa medium temperature: 0-200 ℃ ,0-250 ℃ ,0-300 ℃ ,0-600 ℃, under the conditions required choice. Ambient temperature: -20-60 ℃, -40-60 ℃, under the conditions required choice. Connection: internal thread, flange connection, according to the conditions required to select, but the diameter exceeds DN50, are flanged. Body material: 304 stainless steel, 316 stainless steel, according to the conditions required to select German TEK Selection guide: German TEK solenoid valve product range specifications, the main production: water solenoid valve, steam solenoid valve, gas solenoid valve , air solenoid valve, the vacuum solenoid valve, oil solenoid valve, a refrigerant solenoid valve, solenoid valve explosion, corrosion solenoid valve, high pressure solenoid valve, ultra-high temperature solenoid valve, cryogenic solenoid valve, solenoid valve with manual, self-holding solenoid valves emergency shut off solenoid valve (energized closed), emergency shut-off solenoid valve (power off), the signal feedback solenoid valve, pulse dust solenoid valve, adjustable flow solenoid valve, pure liquid dedicated solenoid valve, double flow solenoid valve, three-way solenoid valve (a), three-way solenoid valve (two), three-way solenoid valve (three), diving solenoid valve, solenoid valve strainer comes with a total of sixty Si column, tens of thousands of varieties of specifications. Solenoid Valve Products classified by way of action mode A, direct-acting B, pilot, C, recoil (no pressure) control classification A, normally closed B, normally open type enclosure divided by A, ordinary type B, dust-C, waterproof D, explosion-proof connection type classification according takeover A, screw-type B, flange type classification by circulating medium of steam, air, water, oil, gas, refrigerant pressure by job classification W- No pressure: 0 ~ 0.6MPa, L-Low: 0.03 ~ 0.6MPa, M-medium pressure: 0.03 ~ 1.6MPa, H-pressure: 0.03 ~ 2.4MPa, C-ultrahigh pressure: 0.1 ~ 380MPa (a total of 12 kinds of super- high pressure range) Note: only suitable for small-diameter high-pressure valve classification according to the rated AC voltage: AC24V, AC110V, AC220V, AC127V, AC380V DC: DC12V, DC24V, DC110V, DC220V coil power by Category 8 (0.34A), 14 (0.6A) , 24 (1A), 50 (2.1A) (exchange of VA, tributaries W) at medium temperature classification -196 ℃, -50 ℃, +60 ℃, +120 ℃, +200 ℃, +250 ℃, +350 ℃, +450 ℃ "Skillfully deflected the question," the pilot solenoid valve is based on this principle, more suitable for large-diameter, high-pressure conditions used. But we must note that the circulation of the media have a certain pressure. I plant a variety of pilot operated solenoid valves require media pressure should be greater than 0.03Mpa to normal use. Recoil solenoid valve principle: recoil solenoid valve (ie no pressure check-in), also known as step direct acting solenoid valve, is direct-acting and pilot-type structure as one of the solenoid valve. It can be a stress condition in the medium by suction of the coil to open the main valve plug, but also in the medium high pressure conditions, the pressure difference is generated so that the main valve plug and opening the solenoid valve. When the coil (1) is energized, the plunger (3) pull, open the main valve plug (5) on the pilot hole (7), while driving the main valve plug (5) open, medium flow. The pressure medium without main valve plug (5) by the coil (1) of the suction opening, media is under pressure, the main valve plug (5) by the pressure on. And vice versa. Scope: In general, the recoil valve solenoid coil size and power than the pilot type of large, suitable for medium pressure from zero to the use of a range of a few kilograms, and is suitable for larger diameter solenoid valve. In particular, the main thing is, recoil solenoid valve must be installed horizontally! Smaller diameter recoil solenoid valve can also be installed vertically, but the user should like to highlight. 进口不锈钢高温电磁阀（图）