克鲁勃NBU 30 PTM防水装配膏

详细内容：产品基本信息： 型号：STABURAGS NBU 30 PTM 英文名称:KluberSTABURAGS NBU 30 PTM 粘度等级：NLGI 品牌/产地：克鲁勃，德国 包装规格及价格：1.2KG/1200 25KG/21600 类型：耐水装配润滑脂 宝贝描述： STABURAGS NBU 30 PTM装配润滑脂 说明：STABURAGS NBU30 PTM是装配润滑脂含有固体润滑剂。它是抗水和可防止摩擦腐蚀（微动腐蚀）。它已被证明有效的在户外应用湿度高。 应用：STABURAGS NBU30 PTM是适合作为脂装配使用应用集成的滑动间隙配合。应用范围包括冷热水阀门和水龙头，滑道（特别是在填补机），阀轴和气缸指南。该产品可因此，作为一个密封脂。在此外，它是合适的润滑导轨，螺栓，主轴和螺丝，例如铁路转向架组件。STABURAGS NBU30 PTM是特别适用于外部铁路车辆制动元件，如螺栓和棒等。STABURAGS NBU30 PTM装配和拆卸faciliates在汽车ABS传感器。 包装规格：1.2千克30公斤桶 德语： STABURAGS NBU 30 PTM Lubricating and assembly grease Description: STABURAGS NBU 30 PTM is an assembly grease containing a solid lubricant. It is resistant to water and protects against tribo-corrosion (fretting corrosion). It has proven effective in outdoor applications subject to high humidity. Application: STABURAGS NBU 30 PTM is suitable as an assembly grease for applications incorporating sliding clearance fits. Applications include hot and cold water valves and taps, slideways (especially in filling machines), valve spindles and cylinder guides. The product can also be used as a sealing grease. In addition, it is suitable for the lubrication of slideways, bolts, spindles and screws, e.g. in railway bogie assemblies. STABURAGS NBU 30 PTM is especially suitable for external brake components of rail vehicles, such as bolts and rods. STABURAGS NBU 30 PTM faciliates assembly and disassembly of ABS sensors in vehicles. Application notes: Use the aerosol spray version of STABURAGS NBU 30 PTM for relubrication of railway brake parts where no grease nipple is incorporated. For optimum penetration into fine clearances we recommend spraying for at least 8 seconds. This will increase efficiency of brake rods in rail vehicles thus ensuring the longest maintenance intervals. When used for assembly and lubricating purposes we recommend the lubricant be lightly applied to the component surfaces via a lint free cloth, by hand, or by brush. Minimum shelf life: The minimum shelf life is approximately 60 months if the product is stored in its original sealed container in a dry place. The minimum shelf life for the product in aerosol canisters is approximately 36 months. Pack sizes: 50 g PE tubes 1.2 kg can 30 kg bucket 250 ml aerosol canister with extension tubeSTABURAGS NBU 30 PTM Assembly grease protecting against tribo-corrosion Good corrosion protection Excellent resistance to water even under outdoor conditions Approved by the company Knorr Bremse, N 12006-1.23