克鲁勃TK M101高温密封润滑脂

详细内容：产品基本信息： 型号：UNISILKON TK M 1012 英文名称:KLUBER UNISILKON TK M 1012 粘度等级：NLGI 品牌/产地：克鲁勃，德国 包装规格及价格：1KG/1350 25KG/20000 类型：滑动和密封高温润滑剂 宝贝描述： UNISILKON TK M 1011; TK M 1012滑动和密封高温润滑剂 说明：UNISILKON TK M1011和UNISILKON TK M1012是润滑，滑动和密封剂根据硅油。他们提供高热稳定性，是不溶于水和耐多种环境介质。UNISILKON TK M1011已经测试和认可，符合DINEN377 E类，DIN - DVGW Reg.-No.吴5162AR0761。 应用：UNISILKON TK M1011用作润滑，滑动和密封剂对燃气燃烧装置的所有类型包括其附件哪一部分在接触与燃料气体，如阀门，锥度旋塞阀，球阀在炊具和加热器与服务温度ACC。以EN为0 °C至160°C，并与燃料气体中天然气等气体混合物和煤气，丙烷，丁烷ACC。到DVGW工作表G260。润滑油的密封元件，以提高容量和降低滑动例如磨损在塑料水龙头。压入和安装的O形圈的援助，填料如滑动和密封膏对在实验室磨玻璃水龙头化学工业绝缘剂高介电击穿强度变电站和开关站防止电弧。 包装规格：1千克25千克 德语： UNISILKON TK M 1011; TK M 1012 High-temperature lubricating, sliding and sealing agent Description UNISILKON TK M 1011 and UNISILKON TK M 1012 are lubricating, sliding and sealing agents based on silicone oil. They offer high thermal stability, are insoluble in water and resistant to many ambient media. UNISILKON TK M 1011 has been tested and approved according to DIN EN 377 class E, DIN-DVGW reg.-No. NG 5162AR0761. Application UNISILKON TK M 1011 is used as lubricating, sliding and sealing agent for all types of gas burning installations including their accessory parts which are in contact with fuel gas, e.g. valves, taper plug valves, ball valves in cookers and heaters with a service temperature acc. to EN 377 of 0°C to 160°C and in context with fuel gases and gas mixtures such as natural gas and town gas, propane, butane acc. to DVGW worksheet G260. Lubricant for sealing elements, to increase sliding capacity and reduce abrasion e.g. in plastics taps. Press-in and mounting aid for O-rings, packings Sliding and sealing paste e.g. for ground-glass and taps in laboratories of the chemical industry Insulating agent High dielectric breakdown strength in substations and switching stations to prevent arcing. Application notes Clean and degrease surfaces. Apply a thin layer to the entire surface by means of brush, spatula or cloth which does not fray. Minimum shelf life The minimum shelf life of UNISILKON TK M 1011 is approx. 24 months if the product is stored in its unopened original container in a dry place. The minimum shelf life of UNISILKON TK M 1012 is approx. 12 months if the product is stored in its unopened original container in a dry place. Pack sizes UNISILKON TK M 1012: 1 x 1 kg PE can UNISILKON TK M 1011: 1 x 50g PE tube 1 x 1kg PE can 1 x 25kg bucket with inliner UNISILKON TK M 1011 UNISILKON TK M 1012 High thermal stability Good resistance to low temperatures Resistant to ambient media Good water resistance UNISILKON TK M 1011 approved acc. to DIN EN 377 class E Neutral towards EN 377 elastomers, e.g. SRE – NBR 1